請注意： 本職位工作地點位于東莞市麻涌鎮大盛工業區潤豐路（毗鄰廣州開發區西區青年路）, 公司每天提供來往東莞、廣州、番禺
等地班車。
Responsibilities
1. As project team member involved in multi-disciplinary projects from the concept and design through to implementation,
commissioning and final acceptance.
2. Identify stakeholder requirements and areas of improvement
3. Research suitable solutions
4. Draft technical specification
5. Technical evaluation on project proposals
6. Supervision on supplier activities regarding technical compliance, quality control, safety assurance and scheduling.
7. Punch list recording and follow-up
8. Analyzing and qualifying project deliverables via ****s and commissioning
9. Documentation
10. In-house expert specialized in automation engineering.
11. Providing support and/or being responsible for works in automation engineering field across projects and/or departments.
Requirements
1. BS above degree in Electrical Engineering/Automation engineer
2. Language: English and Chinese , verbally and in writing
3. Min. 3 years' working experiences.
4. Good knowledge and experiences of process automation, automatic equipment design, automatic integration design,
automation Engineering After-sales service, etc.
5. Good knowledge and experiences of factory network, monitoring system, configuration software as Wincc, SCADA, Ifix, etc.
6. Solid experiences with use of major brands of PLC, such as Siemens, Mitsubishi, Omron, AB, Etc, Touch panel
programming or related programming software.
7. Experienced as project team member accountable for certain tasks
8. Good AutoCAD skill. Capable for drafting of control system scheme.
9. Experiences with measurement/logging devices for power, compressor air, etc.
10. PMI certification is preferred
11. Logical thinking and problem solving skill
12. Multi-discipline perspective
工作職責
1. 作位多個跨專業項目團隊的一員，參與從概念、設計到實施、試運行和最終驗收的整個項目周期
2. 確定項目干系人的需求和需要改進的領域
3. 研究合適的解決方案
4. 起草技術規范
5. 對項目提案進行技術評估
6. 針對技術規范，質量控制，安全保障和實施調度等方面對供應商的各項工作進行監管
7. 管理和跟進項目遺留問題清單
8. 通過測試和試運行對項目交付成果進行分析判斷是否符合驗收條件
9. 文檔記錄
10. 作為企業內部自動化工程方面的專家
11. 為不同項目和/或不同部門的自動化方面的工作提供支持和/或執行任務
工作要求
1. 電氣工程/自動化工程本科以上學歷
2. 語言：英語和中文
3. 最少3年工作經驗
4. 在流程自動化，自動化設備設計，自動化系統集成，自動化售后服務等領域有一定的知識和經驗
5. 在工廠網絡，監控系統，組態軟件如Wincc, SCADA， iFix等方面有一定的知識和經驗
6. 對主流PLC及其相關的軟件，如西門子，三菱，歐姆龍，AB等有扎實的基礎和經驗
7. 具備作為項目團隊一員負責具體任務的經驗
8. 良好的AutoCAD技能。能夠制作控制系統設計草圖
9. 具備使用電表，壓縮空氣流量壓力表等測量記錄儀表的經驗
10. 具備PMI認證的優先考慮
11. 具備邏輯思維和解決問題的能力
12. 具備多學科視角
等地班車。
Responsibilities
1. As project team member involved in multi-disciplinary projects from the concept and design through to implementation,
commissioning and final acceptance.
2. Identify stakeholder requirements and areas of improvement
3. Research suitable solutions
4. Draft technical specification
5. Technical evaluation on project proposals
6. Supervision on supplier activities regarding technical compliance, quality control, safety assurance and scheduling.
7. Punch list recording and follow-up
8. Analyzing and qualifying project deliverables via ****s and commissioning
9. Documentation
10. In-house expert specialized in automation engineering.
11. Providing support and/or being responsible for works in automation engineering field across projects and/or departments.
Requirements
1. BS above degree in Electrical Engineering/Automation engineer
2. Language: English and Chinese , verbally and in writing
3. Min. 3 years' working experiences.
4. Good knowledge and experiences of process automation, automatic equipment design, automatic integration design,
automation Engineering After-sales service, etc.
5. Good knowledge and experiences of factory network, monitoring system, configuration software as Wincc, SCADA, Ifix, etc.
6. Solid experiences with use of major brands of PLC, such as Siemens, Mitsubishi, Omron, AB, Etc, Touch panel
programming or related programming software.
7. Experienced as project team member accountable for certain tasks
8. Good AutoCAD skill. Capable for drafting of control system scheme.
9. Experiences with measurement/logging devices for power, compressor air, etc.
10. PMI certification is preferred
11. Logical thinking and problem solving skill
12. Multi-discipline perspective
工作職責
1. 作位多個跨專業項目團隊的一員，參與從概念、設計到實施、試運行和最終驗收的整個項目周期
2. 確定項目干系人的需求和需要改進的領域
3. 研究合適的解決方案
4. 起草技術規范
5. 對項目提案進行技術評估
6. 針對技術規范，質量控制，安全保障和實施調度等方面對供應商的各項工作進行監管
7. 管理和跟進項目遺留問題清單
8. 通過測試和試運行對項目交付成果進行分析判斷是否符合驗收條件
9. 文檔記錄
10. 作為企業內部自動化工程方面的專家
11. 為不同項目和/或不同部門的自動化方面的工作提供支持和/或執行任務
工作要求
1. 電氣工程/自動化工程本科以上學歷
2. 語言：英語和中文
3. 最少3年工作經驗
4. 在流程自動化，自動化設備設計，自動化系統集成，自動化售后服務等領域有一定的知識和經驗
5. 在工廠網絡，監控系統，組態軟件如Wincc, SCADA， iFix等方面有一定的知識和經驗
6. 對主流PLC及其相關的軟件，如西門子，三菱，歐姆龍，AB等有扎實的基礎和經驗
7. 具備作為項目團隊一員負責具體任務的經驗
8. 良好的AutoCAD技能。能夠制作控制系統設計草圖
9. 具備使用電表，壓縮空氣流量壓力表等測量記錄儀表的經驗
10. 具備PMI認證的優先考慮
11. 具備邏輯思維和解決問題的能力
12. 具備多學科視角
職位類別： 機電工程師
舉報
- 公司規模：1000人以上
- 公司性質：外商獨資
- 所屬行業：機電、機械制造、模具、汽車、汽配、船舶、廚具等
- 所在地區：廣東-東莞市-麻涌
- 聯系人：周先生
- 手機：會員登錄后才可查看
- 郵箱：會員登錄后才可查看
- 郵政編碼：523000
工作地址
- 地址：東莞麻涌鎮大盛工業區
